Cylindrical tank manufactures with high resistance quality aluminum 5454-H32
¼ body thickness single compartment for crude oil transportation

8400 Gal +1% 200 Barrels  42 Feet 11 Inches X 96 Inches wide 

Rings on the cylinder body are manufactured in aluminum quality 5454-H32 with 
3/16 in hat shape 

Baffles 4 aluminum ¼ dome with man holes 

One 20 inch man hole installed tank top centered brand Knappco with 6 quick opening adjustable cam levers . Retractable spill box included .1 Scully vent valve 1 Girard pressure/vacuum valve as per DOT 407 code 

Sub frame constructed from 6061 T-6 structural grade aluminum

Air ride suspension 2 Axle 71.5 track with automatic slack adjusters 30-30 spring break chambers Hendrickson Intraax 30/25 or Meritor RFS-30T  brand depending on availability 

Rear of  two axles is retraceable or lift axle

8 Aluminum 24.5 wheels 7,800 lbs rating Hub Pilot 8 11R 24.5 16 Ply Gladiator tires 

Suspension chassis manufacture from high resistance carbon steel plate 

Anti lock breaking system Mertitor-Wabco model 2S/1M

Interior tank lining Tnemec HI-BUILD EPOXOLINE SERIES  rated 180 degrees F
Chemical  rated for Sweet and Sour Crude 

Kingpin HS Steel grade 50 with 3/8 plate and Holland Pin with 2 inch adjustment holes 

Ladder on road side built from high resistance aluminum 

Walkway around spill dam 12 inches wide on road side of spill dam constructed from aluminum diamond tread material

4 Aluminum fender 2 front 2 rear 

Landing gear two speeds 3/8 structural aluminum base Jost brand 

Discharge system vapor recovery valves with 3 inch tubing and connections 
6 Inch by 4 inch security valve with 4 inch tubing and three 4 inch valves with lateral discharges and pump preparation between landing gears . Rear discharge from tank piped at a slope to the landing gear area . Rear Axle air bag dump to assure tank drainage and clean out to rear . 

2 fire extinguisher holsters installed on each side of tank 

Shock resistant rear bumper structural aluminum as per DOT

Sealed LED lighting and wiring harness also 2 inch wide reflective tape as per DOT & NHTSA 

4 Mud flaps 

24 inch X 24 inch X 36 inch Tool Box 

Pressure gauge and Temperature gauge and mechanical level float gauge installed on drivers side of the tanker 

Clean out/spill hoses four 3 inch hoses on top of tank and two 3 inch hose on each side of the tank

20 wide aluminum hose tray one on each side of tank

Four DOT sign holders 

Certified Hermetic, Hydrostatic & Pneumatic testing information provided for each tank 
MWPA 25 PSI test pressure 40 PSI 
 

$ 91,500.00
+FET Tax +? State Sales Tax or Interstate Exemption 
+ FREIGHT  Approximately 2,600.00 
 

Independent Financing Broker 
Rodnie Nichols
208-624-7277 office
208-624-3434 fax
208-317-7277 cell

GE capital solutions
Heide Baumann
GE Capital Corp
PO Box 35707
Billings, MT 59107
heide.l.baumann@ge.com
435-658-0038

Chopping Motors Riverton Wy 
307-856-2289  Brandon Roomer